Modification of the lamphead

Now it was time for the modification of the lamphead to take care of the problem with leakage and trouble with putting it together (it was so tight that the air needed to get out couldnt come out...).

Next picture shows the 3rd hole I drilled in the back of the lamp where the screw will be (the small hole at the top).


Inside of the back of the lamp where I have fixated a screwnut with superglue.


Here I have added more PL400 glue to keep the nut in place...


Added the switch and also plenty of silicon to make sure it is sealed.


At the arrow you can see the "air"-screw from the outside and it has an small rubberseal also.


This is how it looked like before the modifications...